|
DELUXE - Stud Plate Bumper Bracket Kit
|
|
Stud Plate Bumper Bracket Kit
|
|
|
|
|
|
This hardware kit is a quick solution for attaching bumpers to your robot.
Kit includes:
-16x Brackets 1/8 inch aluminum
-8x Stud plate bumper brackets
-8x 1/4 inch #20 wing nut
-32x 1 inch wood screws
-16x 3/16 inch rivets
To purchase additional Stud Plates click here.
Make sure to check out our video of bumper Basic Construction and Easy Bumper Attachment!
|
This hardware kit is a quick solution for attaching bumpers to your robot.
Kit includes:
-8x Brackets 1/8 inch aluminum
-8x Stud plate bumper brackets
-8x 1/4 inch #20 wing nut
-16x 1 inch wood screws
-16x 3/16 inch rivets
To purchase additional Stud Plates click here.
Make sure to check out our video of bumper Basic Construction and Easy Bumper Attachment!
|
|
|
|
Vanity Bumper Material
|
|
Competition Covers
|
|
|
|
|
|
|
Promoting your sponsors
is important to you and them. Make vanity bumpers with these awesome new
fabric color options: Orange, purple, yellow, black, kelly green, navy blue, blue and red! When
its time for the match, simply slip your competition covers over your promotional bumpers. This
quality fabric is perfect for making your FRC robot bumpers. It is excellent
for iron-on team numbers or custom sponsor logos, and this includes plenty of material
to make your bumpers. It comes in 4 pieces of approx. 55x18" and is enough to make one set of
bumpers (200" single piece available upon request). *Logos and iron-on service sold separately*
|
In the heat of competition, you can use
a competition cover to easily change between red and blue. These custom made, tailored fit
bumper covers easily slide over your existing bumpers and are made of 420 denier nylon. There’s no worry
taking bumpers on and off between matches when you have these handy covers.
There is no sagging or loose bumper material to worry about, and it adds an
extra layer of protection. Measure from point to point (outside corner to
outside corner) on your finished bumper. Submit your dimensions, both length and width
of your bumpers needing to be covered, to ensure a tight fit to your already
finished bumpers. Once we have all the needed dimensions for your bumper
covers, we will custom make them!
|
|
|
|
Super Tough Bumper Material
|
|
Blue 6-inch Corner Bumper Cover
|
|
|
|
|
|
|
The Super Tough Bumper Material is made from 1,000 denier Cordura
fabric. This quality fabric is perfect for making your FRC robot bumpers. It is
excellent for iron-on team numbers as well, and this includes plenty of material
to make all four sides. Robo Promo offers bumper material in both red and blue.
It comes in a 200” single piece. Don't forget to include 8 sets of custom numbers and 8 iron-on service in your order!
|
This new, 6-inch corner bumper cover allows for quick and easy change of bumper colors (For 6-inch bumpers, click here). Color: blue though red is shown.
If you would like to have your numbers ironed on to this material for you, include our Bumper Number Iron-Service in your order by using the following link:
http://www.robopromo.com/product_p/rp-5001.htm
(numbers sold separately)
(logo not included--use iron-on from KOP)
|
|
|
|
6-inch Corner Bumper Kit (Covers Sold Separately)
|
|
Bumper Number Iron-on Service (Per Side-Numbers Not Included)
|
|
|
|
|
|
The Robo Promo corner bumper kit comes in red or blue. This one piece corner bumper is complete with our pre-sewn sleeve, pre-cut fun noodles, and two 5in x 6in x 3/4in pieces of plywood. Just staple in the open flaps, and you are done. This saves you time, weight and money!
For 6-inch bumper covers, click here.
Be sure to check out our video resources on bumper construction.
If you would like to have your numbers ironed on to this material for you, include our Bumper Number Iron-Service in your order by using the following link:
http://www.robopromo.com/product_p/rp-5001.htm
(numbers and logo sold separately)
|
Let us professionally customize your bumper material with your team number for only $6.00/side (numbers sold separately). Our vinyl numbers permanently adhere to the fabric.
*IMPORTANT
Change the quantity to reflect the number of sides you would like us to customize with your team number. Please note that each reversible bumper has two sides. Therefore the quantity for each reversible bumper must be doubled (i.e. the quantity for a full set of reversible bumpers must be set to 8).
|
|
|
|
Blue 8-inch Corner Bumper Cover
|
|
8-inch Corner Bumper Kit (Covers Sold Separately)
|
|
|
|
|
|
This new corner bumper cover allows for quick and easy change of bumper colors.
If you would like to have your numbers ironed on to this material for you, include our Bumper Number Iron-Service in your order by using the following link:
http://www.robopromo.com/product_p/rp-5001.htm
(numbers sold separately)
|
The RoboPromo corner bumper comes in red or blue. This one piece corner bumper is complete with our pre-sewn sleeve, pre-cut fun noodles, and two 5in x 8in x 3/4in pieces of plywood. Just staple in the open flaps, and you are done. This saves you time, weight, and money! Click here to order your 8-inch bumper covers.
Be sure to check out our video resources below on corner bumper construction.
If you would like to have your numbers ironed on to this material for you, include our Bumper Number Iron-Service in your order by using the following link:
http://www.robopromo.com/product_p/rp-5001.htm
(numbers sold separately)
|
|
|
